• +86-731-2822-9105
  • info@gwcarbide.com
  •     

    Your present location:Home >> PRODUCTS >> Tungsten Carbide for Molding >> Wire Drawing Die >> Wire Drawing Die
  • Name: Wire Drawing Die
  • ID: 017
  • Time: 2017-07-06
  • Views : 414
  • Inquiry

    Introduction:

    We choose best tungsten carbide core, to make the drawing dies with high hardness,Good good thermal conductivity, low coefficient of friction. It is suitable for drawing black metal,wire drawing, large size of tube, low working environment required.

    Advantages:

    1.simple manufacture
    2.corrosion resistance
    3.strong impact resistance
    4.quite low manufacturing cost

    Grade chart:

    Grade

    Density (g/cm3)

    Hardness
    (HRA)

    TRS
    (MPa)

    Application

    K10

    14.95

    1800

    91.5

    For drawing inner hole under 6mm

    K20

    14.95

    1900

    90.5

    For rods under 20mm and tubes under 10mm

    K30

    14.8

    2200

    89.5

    For steel and alloy metal or rods and tubes.

    K40

    14.5

    2400

    88.5

    K45

    14

    2800

    87

    For high shrinkage of steel bars and pipes

    5.Types as following are: type 01, type 10, type 11, S11, type 12, type 13, S13 ,type 21, type 22, type 23, type 30, type 31, type 40, type41, type42, type60, R-2, R-4, R-5, R-6, R-7, R-8(9,10) , type V , type W, Type W (ß), type WTA.

    Type 01 – carbide drawing die nibs for drawing ferrous and non-ferrous metal wires

    Type

    D

    H

    Range of d

    h

    01-

    6

    4

    0.2-0.8

    0.8

    8

    6

    1.0

    1.0

    Type10 – carbide drawing die nibs for drawing ferrous and non-ferrous metal wires

    Type

    D

    H

    Range of d

    h

    10-

    6

    4

    0.4-0.8

    0.8-1.2

    8

    6

    0.2-0.8

    1.0-1.5

    Type 11 –carbide drawing die nibs for drawing ferrous and non-ferrous metal wires

    Type

    D

    H

    Range of d

    h

    α°

    11-

    8

    8

    8

    8

    10°

    13

    13

    13

    13

    10°

    16

    16

    16

    16

    12°

    22

    22

    22

    22

    14°

    30

    30

    30

    30

    14°

    Type S11–carbide drawing die nibs with large reducing angles for drawing ferrous metal wires.

    Type

    D

    H

    Range of d

    h

    α°

    S11-

    8

    6

    0.3-1.0

    0.3-1.0

    14°

    10

    8

    0.7

    0.7

    14°

    13

    10

    0.4-2.8

    0.4-2.8

    16°

    15

    13

    0.5-3.0

    0.5-3.0

    16°

    16

    14

    0.4-3.8

    0.4-3.8

    16°

    20

    17

    1.2-4.7

    1.2-4.7

    18°

    21

    17

    1.8-5.7

    1.8-5.7

    18°

    22

    18

    1.7-6.4

    1.7-6.4

    18°

    Type 12–carbide drawing die nibs for drawing non-ferrous metal wires and rods

    Type

    D

    H

    d

    h

    12-

    8

    6

    0.4-0.8

    0.3-0.6

    13

    8

    0.4-2.3

    0.3-1.0

    16

    10

    0.8-3.0

    0.5-1.2

    20

    12

    1.0-5.0

    1.0-1.4

    22

    14

    4.2-5.7

    1.6-2.0

    26

    16

    6.4-8.0

    2.0

    28

    14

    2.6-4.6

    1.3-2.5

    Type 13–carbide drawing die nibs for drawing non-ferrous metal rods

    Type

    D

    H

    d

    h

    α°

    13-

    30

    21

    3.7-9.6

    1.5-4.0

    14°

    40

    24

    9.0

    6

    40

    25

    10.5-15.5

    5

    50

    28

    16.5-24.5

    5.5-6

    60

    35

    25.5-34.5

    7-7.5

    18°

    75

    35

    35.5-43.5

    8

    90

    35

    45-47

    9

    20°

    110

    40

    59-69

    10-11

    140

    50

    71-81.5

    12

    Type S13–Carbide drawing dies nibs with large reducing angles for drawing ferrous and non-ferrous metal wires

    Type

    D

    H

    d

    h

    α°

    S13-

    25

    18

    5.8

    2.5

    20°

    110

    40

    59-69

    10-11

    140

    50

    71-84

    12

    Type 21– Wall thickness reducing carbide die nibs for drawing metal tubes.

    Type

    D

    H

    d

    h

    21-

    50

    50

    20.0-24.0

    17

    60

    60

    26.0-30.0

    70

    70

    32.0-40.0

    20

    80

    80

    42.0-46.0

    90

    90

    48.-54.0

    100

    100

    58.0-62.0

    Type 22– Carbide drawing die nibs for drawing non-ferrous metal tubes

    Type

    D

    H

    d

    h

    22-

    20

    13

    2.8-5.7

    1.5

    30

    18

    6.7-13.5

    2-4

    35

    18

    14.5-17.5

    4

    45

    24

    12.5-13.5

    3

    50

    25

    24.5-30.5

    5-6

    60

    30

    24.5-33.5

    3.5

    65

    32

    34.5-39.5

    6

    70

    35

    34.5-35.5

    6.5

    75

    35

    40.5-42.5

    6.5

    85

    40

    47.5

    6.5

    80

    35

    34.5-47

    6.5

    90

    40

    46-53

    6.5

    100

    40

    55-57

    6.5

    120

    45

    59-67

    6.5

    130

    50

    69-77

    6.5

    140

    50

    79-88

    6.5

    Type 23– Diameter and wall thickness reducing carbide die nibs for drawing metal tubes.

    Type

    D

    H

    d

    h

    23-

    50

    50

    50

    12

    60

    60

    60

    70

    70

    70

    15

    75

    75

    75

    85

    85

    85

    100

    100

    100

    18

    110

    110

    110

    125

    125

    125

    20

    Type 30– Carbide floating plugs for drawing metal tubes

    Type

    D

    H

    d

    e

    30-

    4

    10

    11

    1

    6

    12

    13,15

    1

    8

    12

    17

    1

    10

    14

    19.5,21.5

    1

    12

    16

    23.5

    1

    14

    16

    25.5,27.5

    1-2

    17

    27

    28-37

    2

    19

    27

    38.2,39.4

    2

    21

    27

    40-43

    3

    23

    32

    44-46

    3-4

    25

    32

    47-53

    4

    27

    32

    54-57

    4

    28

    35

    58-64

    4

    Type 31– Carbide floating plugs for drawing metal tubes

    Type

    D

    H

    d

    31-

    7

    25

    14.0-16.0

    8

    25

    17.0-18.0

    10

    30

    19.0-22.0

    12

    30

    23.0-27.0

    16

    35

    28.0-32.0

    20

    35

    33.0-42.0

    22

    40

    43.0-44.0

    26.5

    45

    45.0-47.0

    Type 40– Carbide drawing nibs for drawing square metal bars.

    Type

    D

    H

    Range of A

    h

    α°

    40-

    16

    12

    1.8-2.4

    1

    14°

    22

    18

    2.8-4.0

    1.5

    30

    21

    4.6-4.7

    2

    35

    25

    7.7-9.7

    3

    45

    25

    10.7-14.7

    3.5

    50

    28

    15.7-18.7

    4

    60

    30

    19.7-23.7

    5

    16°

    65

    32

    24.7-27.5

    6

    70

    35

    28.5-31.5

    8

    20°

    80

    35

    32.5-37.5

    90

    40

    38.5-41.5

    100

    40

    42.5-47.5

    129

    45

    49.5-53.5

    Type 41– Carbide drawing dies nibs for drawing rectangular non-ferrous metal bars.

    Type

    D

    H

    Range of a

    Range of b

    h

    41-

    30

    21

    6.7

    4.7

    2

    35

    25

    7.7-9.7

    5.7-7.7

    3

    45

    25

    11.7

    5.7-9.7

    3.5

    50

    28

    13.7-17.6

    6.7-15.7

    4

    60

    30

    19.2-236

    7.7-14.7

    5

    Type 42– Carbide drawing dies nibs for drawing non-ferrous metal strips.

    Type

    D

    H

    Range of a

    Range of b

    h

    42-

    20

    12

    1.9-3.1

    0.6-1.9

    2

    25

    15

    3.9-6.2

    1.0-3.9

    2.5

    35

    18

    7.2-11.4

    1.1-6.3

    2.5

    45

    20

    12.8-14.6

    1.4-5.9

    3

    50

    20

    16.5-23.2

    1.9-6.3

    3

    60

    20

    24.5-31.0

    1.0-3.8

    3

    Type 60– Carbide drawing dies nibs for drawing hexagonal ferrous metal bars

    Type

    D

    H

    Range of S

    h

    α°

    60-

    30

    21

    2.5-7.7

    1.5-2

    14°

    35

    21

    8.6-10.6

    3

    40

    25

    11.5-12.5

    3.5

    45

    25

    13.5-18.5

    4

    55

    28

    19.5-23.5

    5

    65

    30

    24.5-28.5

    6

    16°

    75

    35

    29.5- 37.3

    7

    90

    35

    38.0-49.0

    7

    100

    40

    52.0-57.5

    8

    120

    42

    59.5-74.5

    8

    Note:
    Dimensions for h, h1, h2 and (a, b) are to be agreed upon by the seller and the buyer

    Type R -2

    Type

    D

    H

    d

    h

    α°

    R-2-d

    8.5

    8.64

    0.51-2.54

    1.93-4.39

    12

    Type R -4

    R4-d-12

    12.7

    11.4

    1.9-4.6

    0.5-1.6

    12

    R4-d-16

    12.7

    11.4

    0.3-4.6

    0.5-1.8

    16

    Type R -5

    Type

    D

    H

    d

    h

    α°

    R-5 -d

    16.1

    15.5

    0.76-6.86

    3.05-9.3

    12

    0.76-3.56

    3.05-6.9

    16

    Type R -6

    Type

    D

    H

    d

    h

    α°

    R-6 -d

    18.3

    18.1

    2.03-9.14

    5.08-13.9

    16

    18.0

    17.7

    1.3-6.3

    1.0-2.0

    12

    Type R -7

    Type

    D

    H

    d

    h

    R-7 -d

    19.8

    19.5

    6.35-10.67

    1.9-3.2

    Type R -8 (9, 10)

    Type

    D

    H

    d

    h

    R-8 -d

    25.6

    21

    6.1-12.7

    1.83-3.81

    R-9 -d

    30.4

    21

    10.16-16.51

    3.05-4.95

    R-10 -d

    38.4

    26

    12.7-21.59

    3.81-6.84

    Type V

    Type

    D

    H

    d

    h

    α°

    V-

    15

    13

    0.6-3.6

    3-5.5

    12°

    19

    17

    1.8-6.5

    6-7

    14°

    25

    20

    5.7-7.7

    7-8

    14°

    35

    21

     8.2-11.5

    8-10.5

    14°

    Type W

    Type

    D

    H

    d

    h

    α°

    W102-d

    9

    6

    0.4-1.3

    0.4-0.7

    12°

    W103-d

    12

    8

    0.2-2.7

    0.5-1.4

    W104-d

    15

    10

    0.5-5.0

    0.5-2.0

    14°

    W105-d

    20

    14

    1.0-5

    0.8-2.0

    14°-16°

    W106-d

    25

    18

    5.3-8.0

    1.9-2.2

    16°

    W107-d

    30

    22

    2.9-11.7

    2.2-3.6

    16°

    W108-d

    35

    25

    6.0-1.0

    2.5-4.8

    16°

    W109-d

    40

    27

    10.3-16.5

    3.2-4.6

    18°

    W110-d

    50

    30

    14.4-19.4

    4.4-4.8

    18°

    W111-d

    60

    35

    18.5-27

    4.8-5.6

    18°

    W112-d

    70

    40

    24.5-31.5

    5.4-6.0

    18°

    Type W (ß)

    Type

    D

    H

    d

    h

    W107-d-Dß

    30

    23

    7.5

    3.2

    W108-d-Dß

    35

    26

    19.0

    3.8

    W109-d-Dß

    40

    28

    12.3

    5

    W110-d-Dß

    50

    30

    15.3

    45.

    W111-d-Dß

    60

    36

    21

    6

    Type WTA

    Type

    A

    B

    C

    D

    E

    F

    G

    R

    WTA001

    30.00

    23.00

    24.00

    08.00

    1.0×45*

    04.00

    04.00

    10.00

    WTA002

    30.00

    23.00

    24.00

    09.00

    1.0×45*

    04.00

    04.00

    10.00

    WTA003

    30.00

    23.00

    24.00

    10.00

    1.0×45*

    04.00

    04.00

    10.00

    WTA004

    30.00

    23.00

    24.00

    11.00

    1.0×45*

    04.00

    04.00

    10.00

    WTA005

    30.00

    23.00

    24.00

    12.00

    1.0×45*

    04.00

    04.00

    10.00

    WTA006

    35.00

    26.00

    25.00

    10.00

    1.0×45*

    04.00

    04.00

    12.00

    WTA007

    35.00

    26.00

    25.00

    11.00

    1.0×45*

    04.00

    04.00

    12.00

    WTA008

    35.00

    26.00

    25.00

    12.00

    1.0×45*

    04.00

    04.00

    12.00

    WTA009

    35.00

    26.00

    25.00

    13.00

    1.0×45*

    04.00

    04.00

    12.00

    WTA010

    35.00

    26.00

    25.00

    14.00

    1.0×45*

    04.00

    04.00

    12.00

    WTA011

    35.00

    26.00

    25.00

    15.00

    1.0×45*

    04.00

    04.00

    12.00

    WTA012

    40.00

    32.00

    28.00

    12.50

    2.0×45*

    06.00

    05.00

    12.00

    WTA013

    40.00

    32.00

    28.00

    14.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA014

    40.00

    32.00

    28.00

    15.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA015

    40.00

    32.00

    28.00

    16.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA016

    45.00

    37.00

    28.00

    15.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA017

    45.00

    37.00

    28.00

    17.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA018

    45.00

    37.00

    28.00

    18.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA019

    45.00

    37.00

    28.00

    19.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA020

    45.00

    37.00

    28.00

    20.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA021

    50.00

    40.00

    30.00

    21.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA022

    50.00

    40.00

    30.00

    22.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA023

    50.00

    40.00

    30.00

    24.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA024

    55.00

    45.00

    30.00

    25.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA025

    55.00

    45.00

    30.00

    27.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA026

    55.00

    45.00

    30.00

    28.50

    2.0×45*

    06.00

    05.00

    12.00

    WTA027

    55.00

    45.00

    30.00

    30.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA028

    60.00

    45.00

    30.00

    30.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA029

    60.00

    45.00

    30.00

    33.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA030

    65.00

    50.00

    30.00

    34.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA031

    65.00

    50.00

    30.00

    36.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA032

    65.00

    50.00

    30.00

    38.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA033

    70.00

    55.00

    30.00

    38.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA034

    70.00

    55.00

    30.00

    40.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA035

    75.00

    60.00

    30.00

    42.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA036

    75.00

    60.00

    30.00

    44.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA037

    80.00

    65.00

    30.00

    46.50

    2.0×45*

    06.00

    05.00

    12.00

    WTA038

    80.00

    65.00

    30.00

    48.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA039

    85.00

    70.00

    30.00

    50.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA040

    85.00

    70.00

    30.00

    52.00

    2.0×45*

    06.00

    05.00

    12.00

    WTA041

    90.00

    75.00

    32.00

    53.00

    2.0×45*

    07.00

    05.00

    12.00

    WTA042

    90.00

    75.00

    32.00

    55.00

    2.0×45*

    07.00

    05.00

    12.00

    WTA043

    95.00

    80.00

    32.00

    57.00

    2.0×45*

    07.00

    05.00

    12.00

    WTA044

    95.00

    80.00

    32.00

    60.00

    2.0×45*

    07.00

    05.00

    12.00

    WTA045

    100.00

    85.00

    35.00

    64.00

    2.0×45*

    07.00

    05.00

    12.00

    WTA046

    100.00

    85.00

    35.00

    66.00

    2.0×45*

    07.00

    05.00

    12.00

    WTA047

    110.00

    95.00

    35.00

    70.00

    2.0×45*

    07.00

    05.00

    12.00

    WTA048

    110.00

    95.00

    35.00

    73.00

    2.0×45*

    07.00

    05.00

    12.00

    WTA049

    120.00

    105.00

    35.00

    76.00

    2.0×45*

    07.00

    05.00

    12.00

    WTA050

    120.00

    105.00

    35.00

    78.00

    2.0×45*

    07.00

    05.00

    12.00

    All dimensions in (mm)
    Note: We also produce special carbide drawing die s upon the drawings.


     

    Copyright © Zhuzhou Grewin Tungsten Carbide Tools Co., Ltd All Rights Reserved 湘ICP备17012913号  power by 300.cn